Download Print this page

Reference Table Of Mat And Material Combinations - Brother 891-Z05 Operation Manual

Hide thumbs

Advertisement

Reference Table of Mat and Material Combinations

Use a mat appropriate for the material, as referred to in this table. Before using materials from your project, test
attaching the material to check the adhesion to the mat.
Material
Printer paper
Scrapbook paper
(thin)
Scrapbook paper
(medium-thick)
Cardstock
Vellum, tracing
paper
Poster board
Thin cotton fabric
(for quilt piece)
Thin cotton fabric
(except for quilt
piece)
Flannel (for quilt
piece)
Flannel (except for
quilt piece)
Felt
Denim 14 oz
Plastic sheet (PP)
Vinyl
Magnet
Sticker or seal
Foam sheet
* When cutting paper with a smooth surface
Memo
• When using a 12" × 12" (305 mm × 305 mm) mat, the maximum work area for cutting/drawing is 296 mm × 298
mm (11.65" × 11.73").
• When using an optional 12" × 24" (305 mm × 610 mm) mat, the maximum work area for cutting/drawing is 296
mm × 603 mm (11.65" × 23.74").
• Some fabrics with uneven surfaces can be cut if turned upside down.
14
Thickness
Standard Tack
Adhesive Mat
80 g/m² (0.1 mm)
120 g/m²
(0.15 mm)
200 g/m²
(0.25 mm)
280 g/m²
(0.35 mm)
0.07 mm
400 g/m²
(0.5 mm)
0.25 mm
0.25 mm
0.5 mm
0.5 mm
3 mm
0.75 mm
0.2 mm
0.2 mm
0.3 mm
0.2 mm
3 mm
Mat (for ScanNCut DX)
Low Tack
Adhesive Mat
*
*
Sheet for fabric cutting
Iron-on Fabric
High Tack
Appliqué Contact
Adhesive Fabric
Sheet (White
Support Sheet
Backing)

Advertisement

loading

  Also See for Brother 891-Z05