Retrieve Data - Brother 891-Z05 Operation Manual

Hide thumbs Also See for 891-Z05:
Table of Contents

Advertisement

When saving is finished, the following message
appears. For details on checking data saved in
CanvasWorkspace, refer to the Help for
CanvasWorkspace.
d
Touch the “OK” key to finish saving the data.

Retrieve Data

a
Touch the “Retrieve Data” key in the home
screen to display the recall source selection
screen.
b
To use the data from a USB flash drive, insert
the USB flash drive into the USB port (for a
USB flash drive) on this machine.
c
Touch where you saved the pattern to be
retrieved, and then select the pattern.
c
a
d
b
a Retrieve from machine's memory key
b Retrieve from USB flash drive key
c Retrieve from CanvasWorkspace key (via a
wireless network connection)
d Retrieve from CanvasWorkspace key (using
a USB cable)
a Retrieve from the machine’s memory.
Touch the pattern to be retrieved and display.
b Retrieve from a USB flash drive.
• If there are folders on the USB flash drive, touch
a folder to display the list of patterns that it
contains.
• If there are many folders or patterns, touch the
arrows keys in the screen to scroll up or down.
Memo
• It may take some time for the USB flash drive to
be detected. Wait 5 to 6 seconds after inserting
the USB flash drive before pressing a key. (The
length of time differs depending on the USB
flash drive.)
• When using a USB flash drive with an access
indicator, wait until the indicator stops flashing.
• If an error is indicated, touch
again.
Touch the pattern to be retrieved and display.
Memo
• When retrieving pattern data from the
machine’s memory or a USB flash drive, the
size of the thumbnail previews can be changed.
Touch
to display the settings screen, and
then touch
or
to change the size.
Page 54

Advertisement

Table of Contents
loading

Table of Contents