C1 Additional Parameter Setting - SZKTDZ KT-LCD6 User Manual

Forward 8 Signal
Forward 10 Signal
After finishing C1 parameter setting, hold
current set values and enter C1 additional parameter setting interface, C1 additional
parameter column flashes.
○

C1 Additional Parameter Setting

C1 additional parameter setting is the pedal speed pulse signal setting. that is, pedal a
circle, producing N pulses. C1 additional parameter setting ranges between 5-48, hold
button (UP) or
C1 additional parameters should be set according to the speed
pulse signal of the power assisted sensor, otherwise, the
displayed cadence numerical value is not accurate.
After finishing C1 additional parameter setting, hold
ELECTRIC BICYCLE METER KT—LCD6 Product User Manual
00 Higher
01 Standard
02 Lower
00 Highest
01 Higher
02 Standard
button (DOWN) shortly for selection.
C1 additional parameter setting interface
Reverse 10 Signal
Reverse 12 Signal
button (SW) shortly to save the
- 26 -
05 Higher
06 Standard
07 Lower
05 Highest
06 Higher
07 Standard
button (SW) shortly to