SZKTDZ KT-LCD6 User Manual page 42

to be a data source according to the method of "C11 meter attribute selection setting".
Use special wiring cables to properly wire to LCD6 meter needs to be copied
according to the diagram.
Turn on meter power supply of data source. Power supply of 48V or 36V or 24V is
available (VB + positive power supply). After wiring the meter needs to be copied, hold
button long till meter is startup. Within 5 seconds after startup, hold
(UP) and button (DOWN) simultaneously for about 2 seconds, meter parameter
copy is completed. If the copy operation is correct, the meter subject to be copied will
display as follow.
ELECTRIC BICYCLE METER KT—LCD6 Product User Manual
Meter parameter copy wiring diagram
Special wiring cable
- 41 -
button