1) It is not possible to deactivate the tone of the ON / OFF sensor field.
1. When the appliance is activated,
for three seconds.
The display shows SET1 and "1" flashes.
of the setting.
To exit the Settings menu, touch
touch and hold
10.5 Automatic Switch-off
For safety reasons the appliance
deactivates automatically after some time
if an oven function operates and you do
not change any settings.
Temperature (°C) Switch-off time
50 - 96
After the Automatic switch-off, touch a
sensor field to operate the appliance
The Automatic switch-off
does not work with the
functions: Light, Duration,
End, Time delay.
11. HINTS AND TIPS
Refer to Safety chapters.
then touch it again and hold
to set the setting.
to change the value
Value to set
ON / OFF
YES / NO
10.6 Brightness of the display
There are two modes of display
• Night brightness - when the appliance
is deactivated, the brightness of the
display is lower between 10 PM and 6
• Day brightness:
– when the appliance is activated.
– if you touch a sensor field during
the night brightness (apart from
ON / OFF), the display goes back
to the day brightness mode for the
next 10 seconds.
– if the appliance is deactivated and
you set the Minute Minder. When
the Minute Minder function ends,
the display goes back to the night
10.7 Cooling fan
When the appliance operates, the
cooling fan activates automatically to
keep the surfaces of the appliance cool.
If you deactivate the appliance, the
cooling fan can continue to operate until
the appliance cools down.
The temperature and baking
times in the tables are
guidelines only. They
depend on the recipes and
the quality and quantity of
the ingredients used.