Automatic Programmes - Electrolux EVY8740BAX User Manual

12 www.electrolux.com
time setting flash in the display. The
appliance deactivates.
7. Touch a sensor field to stop the
acoustic signal.
8. Turn off the appliance.
7.4 Setting the END
1. Set an oven function and
temperature.
2. Touch
starts to flash.
3. Use
to confirm. First you set the
minutes and then the hours.
When the set time ends, an acoustic
signal sounds for 2 minutes.
time setting flash in the display. The
appliance deactivates automatically.
4. Touch a sensor field to stop the
acoustic signal.
5. Turn off the appliance.
7.5 Setting the TIME DELAY
function
1. Set an oven function and
temperature.
2. Touch
starts to flash.
3. Use
DURATION.
4. Touch
5. Use
DURATION.
6. Touch
the setting of the END function.
The display shows flashing
7. Use
to confirm. First you set the
minutes and then the hours.
Appliance turns on automatically later on,
works for the set DURATION time and

8. AUTOMATIC PROGRAMMES

WARNING!
Refer to Safety chapters.
again and again until
or to set the END and
again and again until
or to set the minutes for
.
or to set the hours for
, the appliance switches to
.
or to set the END and
stops at the set END time. At the set time
an acoustic signal sounds for 2 minutes.
and the time setting flash in the
display. The appliance deactivates
automatically.
8. Touch a sensor field to stop the
acoustic signal.
9. Turn off the appliance.
and the
7.6 Setting the MINUTE
MINDER
1. Touch
and "00" flash in the display.
2. Use
First you set the seconds, then the
minutes and the hours.
3. Use
MINDER and
4. Touch
starts automatically after 5 seconds.
When the set time ends, an acoustic
signal sounds for 2 minutes and 00:00
and
5. Touch a sensor field to stop the
acoustic signal.
7.7 COUNT UP TIMER
To reset the Count Up Timer, touch
and
shows "00:00" and the Count Up Timer
starts to count up again.
There are 9 automatic programmes. Use
an automatic programme or recipe when
you do not have the knowledge or
experience on how to prepare a dish.
When the Time delay
function is activated, the
display shows a static
symbol of the oven function,
with a dot and
dot shows which clock
function is on in the Clock /
residual heat display.
.
to switch between options.
or to set the MINUTE
to confirm.
or the MINUTE MINDER
flash in the display.
at the same time until the display
. The