Install And Charge The Handset Battery - Geemarc AmpliDECT 595 Photo User Manual

2.4

Install and Charge the Handset Battery

1. Slide the battery cover downwards.
Install the 3 batteries into the socket as indicated, matching correct polarity (+,-).
2. Align the cover flat against the battery compartment, and then slide it upwards
until it clicks into place
3. Charge the handset by placing it face forward in the base. You hear a beep when
the handset is charging in the charger
4. Charge the batteries for at least 12 hours when charging for the first time.
NOTES
•
Use only the batteries supplied NiMH rechargeable.
If you do not use the handset for a long time, disconnect and remove the battery to
prevent possible leakage
.
4