Table of Contents
Advertisement
Because the bicycle has a rear derailleur, the chain will be automatically adjusted.
3.15 Derailleur and gear change
3.15.1 Full details on how to adjust and maintain your derailleur can be found on our website
www.wisperbikes.com
Electric bikes, Manuals.
If difficulty is experienced with changing gear after initial operation of the bicycle, it is likely that
some cable stretch will have occurred in the gear change cable. To compensate for this turn the
knurled adjuster shown in the centre left hand side of the image below by pulling it away from the
outer cable stop in the direction of the cable towards the rear of the bicycle and turning it ½ turn
anticlockwise when viewed from the rear. This will compensate for the cable stretch. If necessary,
repeat the operation again until smooth gear selection is obtained or return your bicycle to your
Wisper dealer for further adjustment.
25
Advertisement
Table of Contents
