Safety Measures; Maintenance Procedure - Tiso BASTION-M Operating Manual

3.1.3 The turnstile to be installed and operated only by the qualified safety briefed
staff having the relevant class of permit to work with electrical facilities with
voltage up to 1000V, awaring of this OM, the turnstile design and principle of
operation.

3.2 Safety Measures

3.2.1 During maintenance
according to p. 2.1 to be observed.
3.2.2 When instrumentations are prepared for operation it is necessary to strictly comply
with the safety requirements specified in instrumentation instruction manuals.

3.3 Maintenance procedure

3.3.1 The turnstile maintenance includes preventive measures which are taken according to the
established frequency to maintain the turnstile in operational condition, decreasing of component
wearing and prevention of faults and malfunctions.
3.3.2 Daily and periodic maintenance of the turnstile are recommended.
Normally the daily maintenance is carried out before the beginning of operation or during
operational timeout and includes visual inspection of the turnstile's housing and, if required,
troubleshooting of mechanical damages, surface corrosion and contamination.
IT IS FORBIDDEN:
TO USE ABRASIVE AND CHEMICALLY ACTIVE SUBSTANCES
DURING CLEANING OF CONTAMINATED EXTERNAL SURFACES
OF THE TURNSTILE.
Stainless steel cleaning spray Polich
WellDone
Stailess steel products and other metals
cleaner XANTO STEEL 3in1
Foam Dr.BECKMANN
Cleaning solution Reinex Edelstahlreiniger Reinex
Stainless steel cleaner
3.3.3 Visual inspection of the turnstile body, control mechanism and other components
for absence of corrosion, warps and other mechanical defects and pollutions;
of the turnstile
3М
Well Done
XANTO
Dr.Beckmann
Onish
the relevant safety
10.
35
measures
Table 10