Tiso BASTION-M Operating Manual page 30

8) The rack door to be removed by
turning the lock key (Fig. 15 ) to
access to the "CENTURION-M" and
"BASTION-M" tripod turnstile base
fixation and service holes as well as
terminal blocks.
The lock pin (1) to be removed and the
latch (2) to be opened by lifting it up to
remove the rack lid (Fig.15 , View А).
1. Door to be opened;
2.Cable to be pulled;
3.Lid to be removed;
4.Card reader to be installed;
5.To be secured with anchors.
Fig. 16 – General view of the "TWIX-M" tripod
turnstile assembly
Fig. 15 – General view of the "CENTURION-M"
and "BASTION-M" tripod turnstiles assembly
9) Two turnstile rack doors to be removed by
uncrewing one screw fastening door to the body
to access to the "TWIX-M" tripod turnstile
base fixation holes.
The screws on the turnstile rack lid butt ends to
be unscrewed and the lid to be removed to
access to terminal blocks.
1.Door to be opened;;
Cable to be pulled;
2.
3. Lid to be removed;
4. Card reader to be installed;
To be secured with anchors.
5.
30
View A