Tiso BASTION-M Operating Manual page 33

hen the turnstile is commissioned it is necessary to perform the inspections specified in
2.3.2.1
Table 9. The wiring diagram according to Annex C and the control panel according to Annex
be used during inspection.
Turnstile operation
mode
1
1. Turnstile is closed
in both directions
(initial state)
Single access in
2.
one direction
Single access in
3.
both directions
4. Free access in one
direction
5. Free access in both
directions
6.
Single access in
one direction and
free access in
opposite direction
7. Single access in
one direction and
locking access in
opposite direction
Operation mode setting
2
–
SINGLE button to be pushed
for access in selected
direction ("A" or "B")
Both SINGLE buttons to be
pushed for access in both
directions ("A" and "B")
FREE button to be pushed for
access in selected direction
("A" or "B")
Both FREE buttons to be
pushed for access in both
directions ("A" and "B")
SINGLE button to be pushed
for access in selected
direction ("A" or "B") and
FREE button to be pushed
for access in opposite
direction
SINGLE button to be pushed
for access in selected
direction ("A" or "B") and
LOCK button to be pushed for
blocking access in opposite
direction
LED display
3
Red LED is lit
Green arrow of authorized single access
is lit in selected direction and red LED
is lit in opposite direction
Green arrows of authorized single
access are lit in both directions
Green arrow of authorized free access is
lit in selected direction and red LED is
lit in opposite direction
Green arrows of
access are lit in both directions
Green arrow of authorized single
access is lit in selected direction
and green arrow of authorized free
access is blinking in opposite
direction
Green arrow of authorized single
access is lit in selected direction
and red LED of locked access is
blinking in opposite direction
to
Table 9
authorized free