X-Rite MA 3 User Manual page 2

M A 3 S P E C T R O P H O T O M E T E R
Consult this documentation in all cases where the Attention symbol
This symbol is used to inform you of any potential HAZARD or actions that may require your attention.
CE Declaration
Hereby, X-Rite, Incorporated, declares that this model is in compliance with the essential requirements and other
relevant provisions of Directive(s) EMC Directive 2014/30/EU, LVD 2014/35/EU and RoHS 2011/65/EU.
Federal Communications Commission Notice
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
NOTICE:
Changes or modifications made to this equipment not expressly approved by (manufacturer name) may void the
FCC authorization to operate this equipment.
Industry Canada Compliance Statement
CAN ICES-3 (A) / NMB-3 (A)
Equipment Information
Use of this equipment in a manner other than that specified by X-Rite, Incorporated may compromise design
integrity and become unsafe.
To avoid discomfort, do not look directly into the measurement optics when the instrument is on.
No user serviceable parts in this product.
WARNING: This instrument is not for use in explosive environments.
Do not immerse the instrument in liquid.
Transportation: This product contains a lithium-ion battery. Should you need to ship this device, you may wish to
consult published guidance documents by one or more of these organizations for advice on how to comply with the
regulations: IATA, ICOA, IMDG & PHMSA. The battery contained in this device is 46g in weight, 3.6V, 2.15 Ah,
and complies with the UN 38.3 tests in effect the year it was originally
The instrument is a sensitive measurement instrument. If the instrument experiences a drop, a calibration should
be performed followed by a selftest before any measurements are taken to ensure the instrument is working
properly. Refer to the Calibration section for information on performing a Calibration.
Instructions for disposal: Please dispose of Waste Electrical and Electronic Equipment (WEEE) at designated
collection points for the recycling of such equipment.
2
appears.
shipped.