Table of Contents
Advertisement
Cutting Depth
The recommended cutting depth is 1/4" below the cutting
table surface. The cutting clearance has been fixed from
original design.
Blade Diameter
8"
10"
WARNING:
Setting the blade too low may damage the cutting table and if set too
high, the blade may grab the material being cut, causing damage
and possibly injury.
Choosing The Right Blade
The blade shaft speed of this saw is exclusi-
1.
bely designed for cutting with diamond saw
blades. The saw may only be used for
cutting natural and artificial stone materials,
do not cut wood or metal!
The saw uses diamond saw blades with
2.
diameters up to 10". Saw blades with larger
diameters must NOT be installed on the
saw.
3.
Choose the correct type of saw blade for the
material to be cut and the required cutting
depth.
Cutting Depth
1-1/2"
2-5/8"
14
Advertisement
Table of Contents
