Sawmaster R1040 Owner's Manual page 19

R1040 • Owner's Manual
Maintenance Steps to Follow when Cleaning the Saw after Use
After use of the saw
After wet cleaning the saw
and before use
19
-
Remove dirty water from water
tray/container.
-
Remove dirt and mud from the bottom
-
of the container.
Rinse the water pump with fresh water
to prevent clogging from residual dirt.
Connect the machine to a ground fault
-
current interrupt (i.e. GFCI) power
outlet. If the device cuts off the
electrical power supply, do not try to
operate the machine but have it
checked by an authorized dealer.