Sawmaster R1040 Owner's Manual page 17

R1040 • Owner's Manual
Dry Cut Blades
DO'S
In addition to the following,
•
always follow wet recommen-
dations.
•
Use appropriate blade for
material being cut.
•
Inspect segment blades for
segment cracking or loss.
•
Do not use damaged baldes.
User proper safety equipment
•
when operating the saw.
17
DON'TS
In addition to the following,
•
always follow wet recommen-
dations.
Do not make long cuts with dry
•
blades--allow them to air cool.
• Do not use the edge or side of
blade to cut or grind.
• Do not attempt to cut a radius
or curve.
Do not cut too deep or too fast
•
into the material.
Do not cut any material not
•
recommended by blade
manufacturer.