CHIEF PSB-2533 Installation Instructions

I N S T A L L A T I O N
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480.
(2) Side Interface Bracket
(4) Mounting Buttons-10-24 Tapped
(8) ¼-20 x .5 Phillips Head Cap Screw
(6) .74 x .39 x 1.0 White Nylon Spacer
(1) 10mm x M6.3mm x 28mm Black Nylon Spacer
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
CAUTION!
WARNING!
1. Using a 10-24 button head cap screw inserted from back side of bracket, secure mounting button, with chamfered hole
of mounting button (larger surface) facing bracket, to top and bottom brackets (four places) (see Figure 2 and Figure 3).
PSB-2533 & PSB-2535
DISPLAY MOUNTING BRACKET
Prior to assembly, unpack carton completely and verify contents.
DISPLAYS ARE EXTREMELY FRAGILE.
ALL COMPONENTS MUST BE SECURELY FASTENED TO A STRUCTURAL
MEMBER CAPABLE OF SUPPORTING 4 TIMES THE COMBINED WEIGHT OF
ALL COMPONENTS PLUS THE EQUIPMENT BEING MOUNTED. IF IT CANNOT
SUPPORT THIS WEIGHT, THE STRUCTURE MUST BE REINFORCED.
THE MAXIMUM WEIGHT TO BE INSTALLED ON THE INTERFACE IS
175 POUNDS (79.38 KG).
Figure 2
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PKWY, STE. 700
SAVAGE, MINNESOTA 55378 USA
I N S T R U C T I O N S
Figure 1
(2) Top/Bottom Bracket
(4) 10-24 x .5 Button Head Cap Screw
(7) M6 x 40mm Phillips Pan Head Screw
(1) 1/8" Allen Key
Figure 3
8804-000280 RevC
©2005 Chief Manufacturing
www.chiefmfg.com
10/05