Setting Up The Wdr Main Unit - Patlite WDT-5LR-Z2 Instruction Manual

(3)

Setting up the WDR Main Unit

①
Setting up the Main Unit
WDS-WIN01 configuration software is required. Download the software from our website and install on the
computer that will be used to set up the system. (Member registration is required for downloading from the home
page.)
For more information about usage and setup, refer to ☞ "WDS-WIN01 Instruction Manual".
②
Setup Items
 Setup items are as follows.
Wireless settings
LAN communication
③
Required equipment
For information on system configuration when setting up the equipment, refer to ☞ "5.2(2)② Maintenance
System Configuration (using the power supply input kit)
 Use the system configuration software WDS-WIN01 for equipment settings.
 Install WDS-WIN01 on the maintenance PC and set up the equipment.
 For information about using WDS-WIN01, refer to ☞ "WDS-WIN01 Instruction Manual".
 The setup procedure is as follows.
■ When Connecting via USB
Step
Prepare required equipment and create
1
maintenance environment
Communication settings between WDR and
2
Maintenance PC
3 USB driver setup
4 WDT setup
5 WDR setup
Setup Item
ExtendedPanID
Wireless channels
LAN communication settings
Item
Wireless Data Acquisition System Instruction Manual
Refer to ☞ "6.1(2) About Grouping and
ExtendedPanID"
Refer to ☞ "6.1(1) What is the WD
Wireless Network?"
Refer to ☞ "6.3(1) Setup Information"
Refer to ☞ "5.2(2)② Maintenance System
Configuration (using the power supply input kit)
Refer to ☞ "WDS-WIN01 Instruction Manual".
45
References
References