7.
Operation
7.1 How to Use the WDT
(1)
WDT Wiring
For the wiring method, carefully read and follow the instructions in the LR Series Instruction Manual.
◆ Before any wiring or fuse replacement, disconnect the power. Failure to follow this instruction
◆ Supply only the correct power, direct current or alternating current, and use the proper voltage.
Prohibited
◆ About the WDT power supply
Mandatory
◆ Signal tower rated voltage: 12 / 24 VDC
Applicable models: LR5-□01 / LR5-□02 / LR6-□02
could result in a short-circuit.
Failure to follow this instruction could result in fire.
To operate the WDT, you need to constantly supply power to the LR series signal tower's power
line.
Wireless Data Acquisition System Instruction Manual
WARNING
CAUTION
◆ Signal tower rated voltage: 100 to 240 VAC
Applicable models: LR6-□M2
30