1. Wire the LR series signal tower.
If wiring is already done, check the wiring.
If wiring is insufficient, complete the wiring.
2. Attach the WDT to the LR series signal tower.
Install the WDT with its setup complete.
(2)
WDR Installation
Step
1
Mounting the WDR
2
WDR wiring procedure
(3)
Check the Connection Between WDT and WDR
Step
1
Check the WDT wireless status
2
Check WDT and WDR setup items
1. Check the WDT wireless status.
Turn on the WDT and WDR.
Check the WDT wireless status with its indicator. Refer to ☞ "8.1(3)① Display Communication Quality"
2. Check WDT and WDR setup items.
Use WDS-WIN01 to check the content of the setup items.
Item
Refer to ☞ "7.2(1) Mounting the WDR"
Refer to ☞ "7.2(2) WDR Wiring"
Item
Refer to ☞ "8.1(3)① Display Communication Quality"
Refer to ☞ "WDS-WIN01 Instruction Manual".
Wireless Data Acquisition System Instruction Manual
References
References
29