How To Use The Wdr; Mounting The Wdr - Patlite WDT-5LR-Z2 Instruction Manual

7.2 How to Use the WDR

(1)

Mounting the WDR

◆ Before any work is done, disconnect the power.
◆ After cutting open wiring access, remove any burrs. Failure to follow these instructions could result
◆ Be careful when cutting open wiring access. Failure to follow this instruction could result in injury.
◆ Turn off the power before performing any electric wiring or product installation. Do not touch the
◆ Turn off the power before performing any electric wiring or product installation. Failure to follow this
Mandatory
◆ When working in narrow or high places, pay attention to safety and follow all safety protocols.
◆ Maintain secure and stable footing when working. Failure to follow this instruction could result in
◆ Do not drop any tools or parts. Failure to follow this instruction could result in injury.
◆ Do not use or install the WDR in locations where liquids such as water is present, oil will splatter, or
Prohibited
◆ When using this product in Korea, supply power with the AC adaptor provided (ADP-001). Do not
◆ When using this product in Brazil, supply power with the AC adaptor provided (ADP-001). Do not
Mandatory
in broken wires.
board directly. Failure to follow this instruction could result in malfunction.
instruction could result in electric shock.
Failure to follow this instruction could result in injury.
injury.
locations that are humid or dusty. Failure to follow this instruction could result in fire, electric shock
or product failure.
supply power directly to the 24 Vdc power terminal block.
supply power directly to the 24 Vdc power terminal block.
Wireless Data Acquisition System Instruction Manual
WARNING
CAUTION
39