Feed Table Capacity; Nomenclature; Installation; Unpacking - Martin Yale 1701 Instruction Manual

1.0 Nomenclature

1. Feed table

2. Exit ramp
3. Retarder
4. Manual/automatic feed lever
5. Paper pusher
6. Feed wheel
7. Power switch
3
5
6
1
10
Fig. 1 Entry View

2.0 Installation

2.1 Unpacking

Carefully unpack the Model 1701 letter folder and accessories. Place the Model 1701 on a flat, level surface where
it will be used. It is necessary to have a clear area at the exit end of the folder to place the exit ramp. Place all of
the packing material back in the shipping box and store the box for any future shipment of the Model 1701. Inspect
the Model 1701 and all accessories for shipping damage. If any dam-
age is found, contact the carrier immediately. Note: Always pick up
the Model 1701 by its sides, never attempt to lift it by grasping
the roller cover or tables.
2.2 Feed Table
The Model 1701 is equipped with a two position non-removable feed
table. The Model 1701 comes packaged with the feed table in the
down position for shipment and storage. Before the Model 1701 is
used, the feed table will need to be tilted up into the operating posi-
tion. Grasp the rear edge of the feed table and pull up (Fig. 3). The
feed table legs will automatically swing down into position. Lock the
feed table into place by insuring the leg shoulder nut slips securely
into the slot in the feed table leg (Fig. 4). To put the feed table back
down for shipping purposes, simply pull the feed table legs away from
the folder and let the feed table down.
After the feed table is in position, the feed table extension may be put
into place. First locate the feed table extension in the accessory
package. Install by lining its 2 protrusions with the corresponding
slots on the feed table and inserting the protrusions into the slots.
When it is correctly installed in position, it will lay flat on the feed table
(Fig. 5 & 6).
8. Electronic display
9. First fold table
10. Second fold table
11. Exit conveyor
12. Stacking wheels
13. Top cover
14. Paper support
13
8
7
14
2
(2)
4
12
Fig. 2 Exit View
leg shoulder nut
9
11
Fig. 3
Fig. 4