Selecting Pre-Set Folds; Selecting Custom Folds; Operation; Automatic Feed Operation - Martin Yale 1701 Instruction Manual

rulers that represent the three common paper sizes (Fig. 12). The
Electronic Display makes setting up folds a simple matter of choos-
ing the paper size (key A) and the fold style (key B).

3.2 Selecting Pre-set Folds

To select one of the pre-set fold styles, proceed as follows:
Turn on the power with the power switch. First select the appropriate
paper size (8.5 x 11, 8.5 x 14 or A4) by pressing key A repeatedly
until the green LED lights up under the desired paper size. Second,
select the fold style by pressing key B in the same manner until the LED lights up under the desired fold style icon.
After a slight pause, the paper stops will automatically move to the correct position. Proceed to section 4.0 to oper-
ate.

3.3 Selecting Custom Folds

If the user wishes to make a fold other than the pre-set selections or to modify a pre-set style, proceed as follows:
(1) Turn on the power with the power switch. If modifying a pre-set fold, first select that style as described in sec-
tion 3.2. To modify or choose a custom fold, press the 1st and 2nd paper stop arrow keys (C & D, Fig. 10) to
move the stops in the desired direction. Note: Immediately upon pressing one of the Custom Fold keys,
the pre-set paper size and fold style icon LED's will go off and the Custom Fold LED's will come on,
indicating the machine is in the Custom Fold mode.
(2) Using the fold table rulers for reference (Fig. 12), move the paper stop in or out with the corresponding arrow
key. Please note that the arrow keys work the paper stops at two-speeds. If the key is pressed momentarily or
jogged repeatedly, the paper stop moves at the slower speed. If the key is held longer, the paper stop will shift
into the faster speed. This is helpful when moving the stops longer distances.
Inch fold
ruler
Rulers - 1st Fold Table

4.0 Operation

4.1 Automatic Feed Operation

Set up the folder as described in sections 2 & 3 of these instructions.
Square the stack of paper to be folded by using a Martin Yale Model 400
Jogger or by tapping 2 sides of the paper stack against a table or other hard
object. Now, while holding the red paper pusher up, place the stack of paper
between the paper pusher and the feed wheel (Fig. 13). The paper stack should
now be straight and resting squarely on the roller cover. Release the paper push-
er and let it come down and rest on the paper edge. Press the Run Key to initiate
folding (Fig. 10). The folder will now start running and process the stack of paper.
The folder will automatically turn off when the paper runs out. After the folder has
FOLD
Paper stop indicator,
Align orange arrow
Metric fold ruler
with desired fold
arrow on fold ruler
Inch fold
ruler
(5)
Letter
Half
Double Parallel
AVOID
FOLD
Rulers - 2nd Fold Table
Fig. 13
Z
Brochure
Fig. 11
Fig. 12
Push Up
Red Paper
Pusher
Only