Table of Contents
Advertisement
● Plug the PE conductor cable from the HPC01 Controller into the rear of the terminal at the
base frame provided for this.
● Plug the supplied C13 cold device cable into the back of the controller box and connect it to
a safety socket, which must be equipped with a grounded connection, protection via fuse
and ground fault circuit interrupter.
The TCC SMART heat press is now ready for use.
Secabo GmbH Hochstatt 6-8 85283 Wolnzach Germany mail@secabo.com www.secabo.com
6
Advertisement
Table of Contents
Need help?
Do you have a question about the TCC SMART and is the answer not in the manual?
Questions and answers