Electrolux WTM165ERA User Manual page 52

The accessory functions that can be activated are:
Function Description
DRAIN TANKS Complete
machine tanks.
DRAIN PREWASH Complete emptying of prewash
tanks (if present in machine).
DRAIN WASH Complete emptying of wash
tank.
DRAIN DUO Complete emptying of DUO-
Rinse tank.
DRAIN AIR GAP Complete emptying of the Air
gap.
DRAIN & CLEAN Cleaning inside machine and
complete emptying of all tanks.
SANITIZATION Complete
(optional)
machine tanks and refilling of
tanks with clean water. Heating
of water up to 75°C/167°F and
wash
complete emptying of tanks.
The display shows:
When an accessory function is being performed, the
display shows
if a drain or drain/cleaning cycle is being performed, or
shows
if a sanitization cycle is being performed.
54
emptying of all
emptying of all
for 1 minute, then
PRESS
TO SELECT
Function
TO START
Function
IN PROGRESS
SANITIZATION
IN PROGRESS
When an accessory function has ended, the dish-
washer emits three acoustic signals and the display
shows
or
It is now possible to:
- quit the accessory functions mode and restart tank filling
by pressing the accessory functions key ("M" - Table 5)
- switch the machine off by pressing the On/Off key
("A" - Table 5)
WARNING!
When the machine is switched off by press-
ing the On/Off button ("A" - Table 5), the
machine remains powered. Press the On/
Off button ("A" - Table 5) again to restart
the machine. Turn the main switch to "0" to
disconnect the power to the machine.
In machines equipped with DT/HAB, shutdown may be
delayed 1 minute in order to carry out drying tunnel
cooling. The display shows:
Wait for the machine to shut down, which occurs
automatically, before turning the main switch to "0".
END
Function
END
SANITIZATION
DRYER COOL-
ING