Bomet Z655/1 Owner's Manual page 9

1-row vibrating digger type Z655 has a rating plate, fitted in the front part of the digger
frame. Basic data which serves for identification of the machine: manufacturer's name,
machine symbol, serial number, year of production, is put there.
Data placed on the rating plate serves for identification of the digger and ought to
correspond to the following data, filled in during the sales. .
Symbol
Year of production:
Serial number ................................................
IT IS ADVISED THAT THE SUPPLIER OF A MACHINE, BOTH NEW AND USED ONES,
KEEP THE SIGNED BY THE PURCHASER CONFIRMATION OF RECEIPT OF
THE MANUAL CONSTITUTES MACHINE BASIC EQUIPMENT
KEEP THIS INSTRUCTION FOR FUTURE REFERENCE
CAUTION!
When lending the machine to another person, the manual shall be
attached to the machine.
CAUTION !
During operation, it is necessary to pay particular attention to loosening of screw
connections. Therefore, it is necessary to check and tighten screw connections
after stopping the tractor and turning off the tractor engine.
REMEMBER
Before work, check the correct cooperation of the PTO
shaft with the tractor. The length of the PTO shaft should
be adjusted to the tractor by changing the length of the
telescopic tubes, see the manual of the PTO shaft.
IDENTIFICATION
1-ROW VIBRATING DIGGER
Z655 .....
201 ....
MANUAL ALONG WITH THE MACHINE.
- 7 -