Construction Of The Vibrating Digger With Rear Discharge; Equipment And Fittings; Preparing The Tractor To Work - Bomet Z655/1 Owner's Manual

variable adjustment of ploughing. At the back of the digger frame there are also brackets for
installing portable warning devices (11) and a triangular sign for low-speed vehicles.

4.2.2 Construction of the vibrating digger with rear discharge

Vibrating digger with rear discharge (Figure 2) can be employed on light and medium
compacted soils, not too stony, weedy and with fragmented haulms. The advantage of the
digger is minor and rare damage to potato tubers during harvest.
Figure 2. Basic units of the vibrating digger with rear discharge: 1 - frame 2 - three-suspension system
studs, 3 - ploughshare, 4 - sifting hopper, 5 - crank mechanism, 6 - support wheels,
7 - mechanism for adjusting the operating angle of the hopper
The main element of the machine is a welded frame, which has the I category of the
three-point suspension system at the front A properly profiled ploughshare is pivotably
mounted at the front. Behind the ploughshare there is a single pendulum sifting hopper.
Vibrations on the ploughshare and the sifting hopper are passed through a simple crank
mechanism. At the back of the digger there are support wheels determining the ridge digging
depth. The intensity of sifting soil can be adjusted by changing the angle of the sifting hopper.

4.3. Equipment and fittings

The manufacturer delivers the digger for sale assembled. The manual with a spare
parts catalogue and a warranty card are delivered along with the machine by the
manufacturer. Basic equipment of the machine does not involve: PTO shaft, portable light
and warning devices and a triangular sign for low-speed vehicles which are available at
agricultural equipment storehouses.
REMEMBER
Manual with a spare parts catalogue comprise basic equipment of the digger.
Each user of a digger shall have light and warning signs, in working order, and a
triangular sign for low-speed vehicles (sign description is available in the section
'Transportation').
damage incurred during an accident the user of the machine is responsible.

4.4. Preparing the tractor to work

Preparation of a tractor to cooperation with a digger consists in checking its general
efficiency in accordance with the tractor manual (pay particular attention to the proper
operation of the suspension system). In addition, it is necessary to uninstall from the tractor
elements disabling mounting the machine or disabling its operation.
Not having them during transportation may result in an accident. For
- 17 -
It is mandatory to