Transportation Of A Digger On The Tractor Three-Point Suspension System; Disassembly And Totalling - Bomet Z655/1 Owner's Manual

CAUTION
When loading the diggers on means of transport, lines or chains shall be installed in
places marked by the manufacturer with pictograms.

6.2. Transportation of a digger on the tractor three-point suspension system

Digger is adjusted for transportation on public roads on the tractor three-point suspension
system. During transportation it shall be raised with the use of the tractor three-point
suspension system so that the clearance equals minimum 25 cm. If during transportation
on the tractor three-point suspension system, the digger obscures the tractor lights,
the digger shall be equipped with portable light and warning devices having at the back:
combination lamps (red position, stop, direction indicator and red reflective one).
tractor lights are visible, it is sufficient to install on the machine a triangular sign for low speed
vehicles and portable light and warning devices equipped with red position and red reflective
light at the back. Portable light devices are connected with the tractor wiring with the use of a
connecting cable ended with 7-pole plugs. Moreover, the tractor, on which the digger is
mounted, should fulfill conditions of admitting it to motion on public roads in accordance with
Highway Code.
CAUTION!
It is forbidden to move on public roads without the proper marking (Ordinance of Minister
of Infrastructure of 31 December 2002 Journal of Laws No 32/2003 item 262 with later
amendments). Digger transported on a tractor suspension system on public roads
should be equipped with portable light and warning devices (if need be) and a triangular
sign for low-speed vehicles installed in special handles installed on the machine.
CAUTION!
When turning, pay attention to "overlapping" of the machine. It is forbidden to transport
people or cargo on the frame of the digger.

7. DISASSEMBLY AND TOTALLING

CAUTION
All maintenance connected with disassembly and totaling of the digger shall be
performed on the tough flat ground, after lowering the digger onto the ground or
support,
In case of occurring permanent damage of the frame or other bearing elements
causing deterioration of functionality and danger of using safety, disassembly and totaling of
the digger shall be performed. Disassembly of the machine should be performed by people,
previously acquainted with its construction, equipped with protective gloves and other
personal protection measures. These activities shall be performed after setting the machine
on the flat and tough ground.
CAUTION
Before starting to disassembly, vibrating digger shall be disconnected from the tractor.
Disassembly should be performed in the proper order, according to the tables included
in the spare parts catalogue, preventing from crushing with untwisted parts. It is necessary to
keep all precautions using protective gloves and efficient tools. All fixings are made of
normalized elements adjusted to metric keys.
ensuring unconstrained unscrewing and tightening up nuts and screws predicted. In case of
screws of yoke fastening working sections to the frame, use bent box spanners.
Due to a number of digger parts exceeding 20 kg (frame, drive shaft), during disassembly
use lifting devices. During disassembly or totaling, parts should be grouped according to the
using proper personal protection measures (e.g. gloves, glasses).
For key movement there are free spaces
- 23 -
If the