Standard Conformity; Manufacturer's Responsibility And Guarantee; Safety Signs And Captions - Bomet Z655/1 Owner's Manual

3.6. Standard conformity

The machine has been designed and made in accordance with standards concerning
safety in the machine industry, valid on the day of marketing the digger. Particularly, following
legal acts and harmonized standards have been taken into account:
 2006/42/WE - Directive on machinery safety introduced by the Ordinance of Minister of
Economy on 21 October 2008 (Journal of Laws 'Dziennik Ustaw' No 199, item 1228).
 PN-EN ISO 12100:2012P - Machinery. Safety. General principles for design. Risk
assessment and risk reduction.
 PN-EN ISO 4254-1:2013-08E – Agricultural machinery. Safety. Part 1: General
requirements (orig).
 PN-ISO 730-1:1996P – Wheeled agricultural tractors. Rear three-point suspension
system. Categories 1, 2, 3 and 4.
 PN-R-02001-01:1993 - Tractors and machinery for agriculture and forestry - Technical
means for ensuring safety - General
 PN-ISO 2332:1998P – Tractors and agricultural machinery. Mounting machinery on a
three-point suspension system. Free space zone.
 PN-ISO 3600:1998P – Tractors, agricultural and forest machinery, mototools. Manual.
Contents and form.
 PN-ISO 11684:1998P – Tractors, agricultural and forest machinery, mototools. Safety
and warning signs. General principles.

3.7. Manufacturer's responsibility and guarantee

In relation to described in this manual machine,
acknowledge any civil responsibility towards:
- improper or inconsistent with the manufacturer's recommendations using the machine,
- using the machine in a way breaking domestic law concerning safety and preventing from
unfortunate accidents,
- non-compliance or improper following regulations cited in this manual,
- making unauthorized changes in the machine,
- using the machine by unqualified staff,
- using spare parts that are not original.
As long as the purchaser wants to make use of warranty, he should strictly follow
recommendations and regulations given in the manual. In particular:
- he should work only in the given ranges of the machine operation,
- he should always perform unchangeable and thorough maintenance,
- only operators with proper abilities and qualifications shall be allowed to use the machine,
- he should use only original spare parts recommended by the manufacturer.

3.8. Safety signs and captions

1-row vibrating digger Z655 of
ensure safe work.
proper operation of the digger, there are warning signs – pictograms which indicate for
possibility of danger and present manners of avoiding it.
In table 1, pictograms placed on the machine and their meanings have been specified.
Safety pictograms should be protected against being lost and against loss of legibility. Lost
or illegible signs and captions should be replaced with new ones. It is required that new
assemblies employed during repair were marked with all safety signs predicted by the
manufacturer. If you want to buy pictograms, write to the manufacturer's address, or send
information to the e-mail address and give the sign number (according to the table 1), version
and year of issuing this manual.
Where it is not possible to secure dangerous places entirely due to the
®
B O M E T company is equipped with all devices that
B O M E T
- 14 -
®
B O M E T company does not
B O M E T