Table of Contents
Advertisement
Maintenance and adjustment at the digger when the tractor engine is working and the
-
machine is not protected against falling down.
When describing residual risk of the digger, the digger is treated as a machine, which since
the moment of starting the production, has been designed and manufactured according to the
present technique condition.
3.4. Estimation of residual risk
During operation of the digger, threat and residual risk can be limited to the minimum
when such recommendations are abided by:
Careful reading the manual,
-
prohibition of people staying on the digger during operation and transport,
-
prohibition of people staying between the tractor and the digger when the tractor
-
engine is working,
all adjustment, maintenance and lubrication of the digger shall be performed only at
-
the tractor engine stopped,
repairs of the digger performed only by people trained in this field,
-
operation of the machine by people who have qualifications to drive agricultural
-
tractors and are familiar with the manual of the machine,
During repair, at the machine raised if necessary, the machine must be protected
-
against falling down e.g. with a wood block.
protection of the digger against children access.
-
Although
B
B
construction in order to eliminate danger, certain risk elements during vibrating digger
operation are unavoidable.
1) Danger of being caught or hurt by the frame edges or sharp edges of the
ploughshares and sifting hoppers of the digger during aggregation or changing
transportation-operation position and inversely.
2) Danger of wound or abrasion by elements of the machine during performing
maintenance or adjustment resulting from improper position of the operator during these
activities.
3) Danger of turning over the machine during storage or transportation. When stored
to keep stability, the digger should be set on the flat ground on support wheels and
plouhshares. The digger shall be aggregated only with recommended tractor classes
equipped with front axle ballasts.
4) Danger of being caught by rotating drive elements. Keep the safe distance when
the rotating elements are in motion. The operator and other people should not approach the
machine during the operation.
5) Danger of throwing out stoned by sifting hoppers during operation. Keep particular
caution and safe distance during the operation of the machine. The operator and other
people should not approach the machine during its operation.
3.5. Regulations for occupational health and safety
®
O
M
E
T
company
O
M
E
T
CAUTION
In order to avoid threats, before starting operation of the digger, please
read the present manual and follow these rules concerning threats and
safety measures:
takes
responsibility
- 11 -
for
pattern-designing
and
Hide quick links:
Advertisement
Table of Contents
