Cisco BWX 8415 Installation And Commissioning Manual page 5

Commissioning
7
C H A P T E R
OL-19519-01
P R E L I M I N A R Y
6.3.7 Set the Downtilt
6.3.8 Antenna Orientation
6.4 Power and Ground Cabling
6.4.1 Overview
6-20
6.4.2 System Ground Cabling
6.4.3 System Power Cabling
6.5 Fiber-Optic Cabling
6-23
6.6 Complete the BWX 8415 Installation
6.6.1 Install the I/O cable Cover
6.6.2 Test the Backhaul Connection
7-1
7.1 Install the Element Management System (EMS)
7.1.1 'Setup the 'Test' EMS
7.1.2 Setting Up Direct Communications Software
7.1.3 Install the BWX EMS Software and Start & Configure the BWX EMS Server
7.2 Install Access Services Network Gateway (ASN-GW) Hardware and Broadband Wireless Gateway
(BWG) Software
7-6
7.3 Add and Configure the BWG to the EMS Server
7.4 Authentication, Authorization, and Accounting (AAA) Server Installation
7.5 Add and Configure a BWX 8415 Basestation
7.5.1 Minimum System Configuration Requirements
7.5.2 Add a BWX 8415 Basestation
7.5.3 Configure a BWX 8415 Basestation
7.6 Power Up and Provision the BWX 8415 Basestation
7.6.1 Prerequisites
7-28
7.6.2 BWX 8415 Basestation Bootup
7.6.3 Provision the BWX 8415 Basestation
7.7 Calibration
7-37
7.7.1 What it Means to Calibrate
7.7.2 Types of Calibration
7.7.3 Calibration Procedure
7.8 Add, Configure, Modify and Delete Subscriber Stations (SSs) and Use Related Applications
7.8.1 Overview
7-44
7.8.2 Supported SS
7.8.3 Add, Configure, Modify and Delete an SS
7.8.4 Connection Utility
7.8.5 BWX WiMAX Diagnostic Tool Operation
6-18
6-19
6-20
6-20
6-22
6-23
6-23
6-24
7-1
7-7
7-9
7-10
7-13
7-29
7-35
7-37
7-37
7-38
7-44
7-46
7-47
BWX 8415 Basestation Installation and Commissioning Guide
7-1
7-2
7-8
7-9
7-28
7-45
Contents
7-3
7-44
v