Table of Contents
Advertisement
Chapter 1
Safety
The BS is a Radio Frequency transmitter. It is required to comply with FCC and local country RF
Warning
exposure requirements for transmitting devices. A minimum separation distance of 2 meter or more
must be maintained between the antenna and all persons during device operations to ensure
compliance with the FCC's and the local country's rules for Radio Frequency Exposure. If this minimum
distance cannot be maintained, exposure to RF levels that exceed the FCC's and the local country's
limits may result.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
Note
to part 15 of the FCC Rules and local country rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Information to User
The BS has been authorized as a radio frequency transmitter under the appropriate rules of the Federal
Communications Commission. Any changes or modifications not expressly approved by Cisco could
void the user's authority to operate the equipment.
Safety Information
Follow the guidelines in this section to ensure proper operation and safe use of the access point.
Safety Precautions for the BWX 8415 Basestation
In order to comply with radio frequency (RF) exposure limits, the antennas for this product should be
Warning
positioned no less than 6.56 ft. (2 m) from your body or nearby persons. Statement 339
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Warning
Statement 1001
Warning
Class 1 laser product.
Warning
A readily accessible two-poled disconnect device must be incorporated in the fixed wiring. Statement
1022
OL-19519-01
P R E L I M I N A R Y
Statement 1008
BWX 8415 Basestation Installation and Commissioning Guide
Information to User
1-3
Advertisement
Table of Contents
