Clearing Lcd Error Messages - Samsung SCX-4520S User Manual

Display
Cancel ?
1:Yes 2:No
(only for the SCX-
4720F/4720FS)
[Comm. Error]
(only for the SCX-
4720F/4720FS)
Delayed
Function Full
(only for the SCX-
4720F/4720FS)
Document Jam
[Door Open]
Enter Again
Low Heat Error
Open Heat Error
[Over Heat]
Function
Impossible
Group Not
Available
(only for the SCX-
4720F/4720FS)
9.12
T
ROUBLESHOOTING

Clearing LCD Error Messages

Meaning
Your machine's memory
has become full while
trying to store a
document into memory.
The machine has a
communication problem.
The delayed fax jobs
queue is full.
The loaded document
has jammed in the ADF
(Automatic Document
Feeder).
The front door is not
securely latched.
You entered an
unavailable item.
There is a problem in the
fuser unit.
You have tried to use a
combination of machine
functions that can not be
used at the same time.
You have tried to select a
group location number
where only a single
location number can be
used, such as when
adding locations for a
broadcast operation.
Suggested solutions
To cancel the fax job, press the 1
button to accept "Yes."
If you want to send there pages
that have been successfully
stored, press the 2 button to
accept "No." You should send the
remaining pages later, when
memory is available.
Ask the sender to try again.
Cancel unnecessary delayed fax
job.
Clear the document jam. See
page 9.2.
Close the door until it locks into
place.
Enter the correct item again.
Unplug the power cord and plug it
back in. If the problem persists,
please call for service.
Reduce the number of selected
functions or use only one function
at a time.
Use a speed dial number or dial a
number manually using the
number keypad.