Clearing Lcd Error Messages - Samsung SCX-4216F User Manual

Clearing LCD Error Messages

Display
Cancel ?
1:Yes 2:No
(only for SCX-4216F)
Comm. Error
(only for SCX-4216F)
Document Jam
(only for SCX-4116/
4216F)
Door Open
CRU Fuser Error
Heating Error
Open Heat Error
Over Heat
Group Not
Available
(only for SCX-4216F)
Incompatible
(only for SCX-4216F)
Invalid
Cartridge
Meaning
Your machine's memory is
full during the machine
stores the document into
the memory.
The machine has a
communication problem.
The loaded document has
jammed in the ADF
(Automatic Document
Feeder).
The front or rear cover is
not securely latched.
There is a problem in the
fuser unit.
You have tried to select a
group location number
where only a single
location number can be
used, such as when
adding locations for a
broadcasting operation.
The remote machine did
not have the requested
feature, such as a delayed
transmission.
It also occurs if the
remote machine does not
have enough memory
space to complete the
operation you are
attempting.
You have used
unauthorised cartridge.
Suggested solutions
To cancel the fax job, press the
button to accept "Yes."
If you want to send the pages were
stored, press the 2 button to accept
"No." You should send the
remaining pages later when the
memory is available.
Ask the sender to try again.
Clear the document jam. See
page 8.2.
Close the cover until it locks into
place.
Unplug the power cord and plug it
back in. If the problem persists,
please call for service.
Just use a speed dial number or dial
a number manually using the
number keypad.
Reconfirm the remote machine's
features.
You must use a Samsung approved
cartridge.
T
ROUBLESHOOTING
1
8
8.11