Table of Contents
Advertisement
P
h
o
n
e
C
o
n
f
i
g
u
r
a
t
i
P
h
o
n
e
C
o
n
f
i
g
u
r
a
t
i
Perform the following steps if your server does not have Option 66 configured with the Teo
Update Server address. You will need to set the appropriate server address and login
credentials in the phone menu to enable auto provisioning.
1. If this phone was configured on another extension, it must be removed from Teo
UCM and reset to factory defaults (page 28).
2. Tap the Phone Settings
3. In the icon list at the right, tap Maintain.
4. If 0.0.0.0 is displayed as the current Server address under the Update tab, delete this
entry and enter the correct Teo UC server address. This entry can be either an IPv4
address or a fully qualified domain name.
5. Enter the user extension login credentials.
User is the extension number@tenant domain (e.g. 1000@teo) for multitenant
systems, or just the extension number (e.g. 1000) for single tenant systems.
Password is the SIP password assigned to the extension.
6. Tap Save.
7. Tap the Reboot tab, and then tap the Reboot button to restart the phone using the
new server address and login credentials.
8. After rebooting has completed, tap the Phone Settings
zero phone IP address is shown on the Status screen; if not, reboot again.
9. After a few minutes, the configuration will be downloaded to the phone.
10. Verify phone registration by making a test call.
13-280142 Rev. B
o
n
w
i
t
h
S
t
a
t
i
c
S
e
r
o
n
w
i
t
h
S
t
a
t
i
c
S
e
r
icon.
v
e
r
A
d
d
r
e
s
s
v
e
r
A
d
d
r
e
s
s
Setup Menu Tree
icon. Verify that a non-
Page 27
- Quick Links:
- General Features
Hide quick links:
Advertisement
Table of Contents
