Teo 9160 Installation Instructions Manual page 24

Teo IP Phone 9160 Installation Instructions
C o n f i g u r i n g M u l t i c a s
C o n f i g u r i n g M u l t i c a
1. Click the MULTICAST tab.
2. If ENABLE PRIORITY is selected, paging zones are prioritized (1 is the highest
priority) and will preempt lower priority zones. For example, a Priority 1 page will
preempt a Priority 2 page in progress. If ENABLE PRIORITY is not checked, all
paging zones have the same priority and will not preempt each other.
3. NORMAL CALL PRIORITY sets the priority of normal calls. For example, if a normal
(non-multicast) call is in progress with NORMAL CALL PRIORITY = 2 and a Priority 1
multicast page is initiated, the phone will automatically place the call on hold and
respond to the multicast page. If a Priority 1 multicast page is in progress when a
normal call is placed to the phone, the incoming call will be immediately redirected
to voicemail and the page will not be interrupted. Likewise, if the same or lower
priority page (e.g. Priority 2) is initiated when the phone is on a normal call, the
normal call will not be interrupted. If the same or lower priority multicast page is in
progress when a normal call is placed to the phone, the phone will ring, allowing
the user a choice of remaining on the page or answering the incoming call. If
NORMAL CALL PRIORITY is set to DISABLED, normal calls are never preempted.
4. For each priority paging zone you wish to configure, click a row in the MULTICAST
LISTENERS table. The IP Phone 9160 can be configured to listen to up to 10
multicast zones.
Page 24
t L i s t e n e r s
s t L i s t e n e r s
13-280142 Rev. B