Teo 9160 Installation Instructions Manual page 19

Table of Contents

Advertisement

D
i
a
l
i
n
g
M
o
d
e
D
i
a
l
i
n
g
M
o
d
e
Dialing Mode controls automatic dialing.
NORMAL – after the user has entered all digits, they must tap the voice or video
icon to manually initiate dialing, or wait for the number of seconds set in TIMEOUT
(SEC) for automatic dialing.
WARM DIAL – when the phone goes offhook, it will automatically dial the number in
the DESTINATION field after the number of seconds set in TIMEOUT (SEC). A user
can dial a different number before the timeout, canceling the automatic dialing.
HOT DIAL – similar to WARM DIAL, but automatic dialing occurs immediately after
the phone goes offhook (no timeout).
N
e
t
w
o
r
k
R
e
s
o
u
r
c
e
N
e
t
w
o
r
k
R
e
s
o
u
r
c
e
Basic network information is typically provided by DHCP. SIP OPTIONS and SIP PROXY
SERVERS should be set explicitly via configuration download.
IP Address – To set the IP address, subnet mask, and default gateway statically,
uncheck AUTOMATICALLY OBTAIN FROM DHCP. Leaving the fields blank will
allow static network information to be set locally at the phone, otherwise set values
as desired.
DNS – To set the DNS server(s) statically, uncheck AUTOMATICALLY OBTAIN
FROM DHCP. Leaving the fields blank will allow static name server values to be set
locally at the phone, otherwise set values as desired.
NTP – To set the NTP server(s) statically, uncheck AUTOMATICALLY OBTAIN FROM
DHCP. Leaving the field blank will allow the time server(s) to be set locally at the
phone, otherwise set value as desired.
SYSLOG – To manually enable syslog, check ENABLE SYSLOG, and
and
SERVER ID
SIP OPTIONS – Change the TRANSPORT, NAT KEEP ALIVE, and NAT TIMER (SEC)
options if required by your network.
SIP PROXY SERVERS – Select +PROXY and enter the Teo UC server IP address or
fully qualified domain name and port. If a backup server is installed, enter that
address below the primary server. If no proxy server is entered, the primary server
address is assumed to be the same as the Update Server address.
13-280142 Rev. B
s
s
information.
LOG LEVEL
Setup Menu Tree
fill in the
Page 19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents