Temperature Setback Delay - Cool - Friedrich EMWRT1 Instruction Manual

Custom Energy Savings Settings
14 – TEMPERATURE SETBACK DELAY - COOL
00-120
for which the room that is in the guest occupancy mode needs to be
unoccupied before the temperature setback is initiated.
This feature prevents initiating temperature setback prematurely while
the guest is still in the room but in an area where occupancy cannot
be detected by the occupancy sensor.
Setting the "Temperature Setback Delay - Cool" to "00", disables the
setback in the cool mode. Set to "00" to disable EMS.
34
(20* default setting) Select the time delay (in minutes)