Software; Adf7030-1 Design Center; Embedded Development - Analog Devices ADF7030-1 EZ-KIT User Manual

UG-1006

SOFTWARE

ADF7030-1 DESIGN CENTER
The ADF7030-1 Design Center is a powerful software tool for
evaluation, performance analysis, and configuration of the
ADF7030-1. It provides a GUI for configuring the ADF7030-1,
evaluating transmit and receive operation, and transmitting and
receiving packets.
Installation
Download the ADF7xxx EZ-KIT Design Suite from
www.analog.com/EVAL-ADF7030-1EZ-KIT. After downloading,
double-click the executable to begin the installation. Follow the
on-screen prompts until the installation is complete.
Setup
Use the following procedure to set up the evaluation kit:
1. After installing the ADF7xxx EZ-KIT Design Suite software,
ensure that the ADF7030-1
the ADuCM3029 mother board. Plug the USB cable into the
mini USB port (P6) on the
and plug the other end of the cable into the PC on which
the software is installed.
2. Start the ADF7xxx EZ-KIT Design Suite software. From
the Start menu, go to All Programs, Analog Devices,
ADF7xxx EZ-KIT Design Suite, and click ADF7xxx
EZ-KIT Design Suite.
daughter board is plugged into
ADuCM3029 mother board,
3. The ADF7xxx EZ-KIT Design Suite start screen appears
when the program is opened.
4. From the main screen, the user can select the relevant
device to evaluate. In this case, select the ADF7030-1.
5. After selecting which device to connect with, a new screen
appears with a list of boards to connect with, depending on
the number of
the PC. Each of the boards connected to the PC has a
board number displayed on the LCD screen. Select one of
the boards from the list to connect to, and then click OK to
begin evaluation in the

EMBEDDED DEVELOPMENT

The ADuCM302x EZ-KIT board support package (BSP)
provides software and documentation in support of the
ADuCM3029 mother board. It is available for download from
www.analog.com/ADuCM3029EZKIT.
The ADuCM3029
Workbench software development tools. For more details on IAR,
see the IAR website.
The BSP provides comprehensive software support for the
ADuCM3029 mother board, which includes drivers and
services that demonstrate the on-chip drivers and services. The
device driver and services documentation is part of the BSP.
Rev. 0 | Page 6 of 7
ADF7030-1 EZ-KIT User Guide
ADuCM3029 mother boards plugged into
ADF7030-1 Design Center.
mother board works with the IAR Embedded