Advertisement
Getting to know your machine
Separator and shroud
Hose entry point
Dirt container release button
Power On/Off button
Post-motor filter cover
Technical Specification
Name Dynamo Power Total Home
Voltage 220-240V~50Hz
Wattage 1600w
Cord length 6m
Weight 5.2kg
*
Subject to technical change without notice.
To purchase consumables and accessories, please visit
Dirt bin lid release clip
Dirt container
Carry handle
Cord rewind button
Post-motor filter
cover release clip
Accessories & Consumables
Filter pack*
VX54F
Double
This product
Indoor
Read
Insulated
meets applicable
Use
Instructions
regulatory
requirements
vax.com.au
PLEASE READ 'LET'S TALK SAFETY' AT THE BEGINNING BEFORE USE
Before you begin cleaning
• Always switch off and unplug the vacuum cleaner before connecting or disconnecting the hose/attachments,
or removing and emptying the dirt container.
• The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat the
thermostat will automatically turn the vacuum cleaner off. If this happens, switch the vacuum cleaner off and unplug
from electrical socket. Remove and empty the dirt container also check the vacuum cleaner for blockages. Allow the
vacuum cleaner to cool for approximately 1 hour (if you have cleaned the filters please wait 24 hours for the filters
to fully dry before putting back into the vacuum machine).
• For best cleaning results, filters should be tapped over a bin every 4-6 uses to remove dirt and debris and washed
every 3 to 6 months (depending on the level of use).
• If the vacuum cleaner is blocked, switch off and unplug before removing the blockage.
Assembling your vacuum cleaner
click!
Press both buttons
Insert the hose grip into the
at the end of the hose
telescopic extension tube.
and push hose into
the hose entry point.
!
Fully unwind the power
Plug in and switch the
cord. A yellow mark on
unit on by pressing the
the cord indicates the
power button.
recommended cord length.
Do not exceed the cord
beyond the yellow mark.
Getting started
Press the button on the
Insert the other end of
telescopic extension
the telescopic extension
tube and adjust to
tube into the floorhead.
required length.
When unwinding the
power cord always pull
out to the yellow marker
but no further.
CAUTION
Advertisement
