Do not use this steam mop with a damaged cord or plug. If Don’t use the steam mop if it has been dropped, if there the supply cord is damaged return the steam mop to a Vax are visible signs of damage or if it is leaking, if it has been...
Page 3
We ’ re here if you need us For troubleshooting simply visit or call: Australia: 1300 361 505* New Zealand: 0800 800 900* vax.com.au vax.co.nz *Monday – Friday: 8:30am -5:00pm Calls are charged at the standard local rate. Please make note of the serial...
Contents Steam Fresh Boost Included with your machine Let’s talk safety x2 250ml Getting to know your machine Vax Steam Detergent Getting started x2 Microfibre cleaning pad Using your machine Carpet glider Taking care of your machine Hard water filter...
Getting started PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE Assembling your steam mop Push the main body down Push the handle into main To stand steam mop into the floor head until it body until it clicks upright push handle until clicks into place into place...
IMPORTANT: If you do not want to use detergent on your flooring, select carpet or wood on the surface selector. Always test on an inconspicuous area of flooring first before using detergent. Filling twin tank Pour 50ml of Vax Before replacing the twin Align the twin tank and push...
Page 8
Using your machine Using your machine To produce steam, squeeze Move the steam mop slowly For steam burst from front nozzle set the trigger. To prevent over backwards and forwards across to steam only select wood or carpet. wetting floors avoid holding the floor paying particular attention Press the steam burst button to activate, the trigger continuously...
Using your machine Refreshing carpets To produce steam, squeeze Move the steam mop slowly To remove carpet glider the trigger. To prevent over backwards and forwards across push down on clip and wetting floors avoid holding the carpet paying particular lift steam mop the trigger continuously attention to high traffic areas...
Taking care of your machine IMPORTANT: Allow the steam mop to fully cool down before performing any maintenance or troubleshooting checks Don’t leave water or detergent in the twin tank between uses, as this can effect the machines performance, the twin tank needs to be emptied and rinsed after each use Emptying the twin tank Press the twin tank...
Taking care of your machine Replacing the hard water filter Remove twin water Lift to remove the hard New filter - Hard water filter should be tank to access the water filter (beige/cream colour) replaced every 6-8 months hard water filter or when discoloured and darkened (dark orange) Clearing blockages...
What to do if it goes wrong Problem Solution • Check the ‘This pack contains’ panel on the box to make sure the part is included with your machine There is an accessory missing • Check the On/Off switch is in the On position •...
Getting in touch * Calls are charged at the standard local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling.
Need help?
Do you have a question about the VX23 Series and is the answer not in the manual?
Questions and answers