Service Processor - Hitachi Virtual Storage Platform G130 Hardware Reference Manual

Service Processor

The VSP G130 include an optional, separate 1U service processor (SVP) dedicated to host
an element manager (Storage Navigator). The SVP operates independently from the CPU
of the storage system and operating system, and provides out‑of‑band configuration and
management of the storage system. The SVP also monitors and collects performance
data for key components of the storage system to enable diagnostic testing and analysis
for customer support.
The SVP provides four RJ-45 ports:
Two ports connect to the storage system controllers (one port for each controller).
■
One port connects to the IP network of the user.
■
One port connects to a user-supplied management console PC.
■
Note: This product is also designed for IT power distribution systems with
phase-to-phase voltage.
Three of the four RJ-45 ports (which connect to the controllers and the IP network) are
configured as a bridge. The SVP can be addressed using the default IP address
192.168.0.15.
In the unlikely event you cannot connect to the SVP using the default IP address, use the
following emergency login: http://<default SVP IP address>/dev/storage/
<model number><system serial number>/emergency.do. For example:
Storage system model
number
8320004
8340004
8360004
Users are responsible for adopting the appropriate security procedures with the SVP:
Applying Windows security patches.
■
Turning on automatic Windows updates or using the manual Windows update
■
method.
Installing antivirus software that has been tested and approved by Hitachi.
■
Hitachi Virtual Storage Platform G130 Hardware Reference Guide
Storage system serial
456789
456789
456789
Chapter 2: Hardware components and specifications
number
http://192.168.0.15/dev/
storage/8320004456789/
emergency.do
http://192.168.0.15/dev/
storage/8340004456789/
emergency.do
http://192.168.0.15/dev/
storage/8360004456789/
emergency.do
Service Processor
URL
44