AT&T E2912B User Manual page 7

Getting started
Quick reference guide
Telephone base
•
CHARGE/ IN USE
Flashes when another telephone on the same line or one of the
handsets is in use.
Flashes when the answering system is answering an incoming call.
Flashes while an incoming call is ringing.
On steady when the handset is properly positioned to charge in the
telephone base.
Answering system controls (see pages 31-39)
Press to repeat mes-
sage. Press twice to
hear previous mes-
sage.
Press to play or stop playing messages.
ANSWER ON ................... Press to turn answering system on or off.
DELETE ............................ Press to delete a message during play back.
CLOCK.............................. Press to review or set the answering system
SETUP............................... Press to review or change answering system
ANNC ................................ Press to review or record announcement;
RECORD........................... Press to record a memo, or after pressing
3
VOLUME
Press to adjust message
playback volume.
HANDSET LOCATOR
Press to make handsets
beep (see page 12).
While set is idle, press and hold to delete all
old messages.
clock.
options.
press again to quit.
ANNC, to record an outgoing announcement.
Press to skip to
next message.