AT&T E2912B User Manual page 11

Getting started
Telephone base installation
5.
Plug the large end of the
larger power adapter into an
electrical outlet not control-
led by a wall switch.
1.
Plug one end
of the telephone
line cord into the
telephone jack at
the bottom of the
telephone base.
NOTES:
1. Use only the power cord supplied with this product. If you need a replacement, call 1 (800)
222-3111. In Canada, call 1 (866) 288-4268.
2. Be sure to use an electrical outlet not controlled by a wall switch.
3. This power adapter is intended to be correctly plugged into a vertical wall outlet, or a floor
outlet, or a horizontal/vertical power strip/bar. The prongs are not designed to hold the
plug in place if it is plugged into a ceiling outlet.
3.
7
4.
Plug the other end of the
telephone line cord into a
modular telephone jack.
Route cords through slots.
2.
Plug the small end of
the larger power adapter
into the power jack at
the bottom of the tel-
ephone base.