Related Manuals for General MM8
Summary of Contents for General MM8
- Page 1 PINLESS LCD MOISTURE METER WITH TRICOLOR BAR GRAPH USER’S MANUAL Please read this manual carefully and thoroughly before using this product.
-
Page 2: Table Of Contents
Return for Repair Policy ......8 INTRODUCTION Thank you for purchasing General Tools & Instruments’ MM8 Pinless LCD Moisture Meter with Tricolor Bar Graph. Please read this user’s manual carefully and thoroughly before using the instrument. - Page 3 Behind the top of the MM8 are two metal plates. When the meter is powered on, the plates are given small and opposite charges. The potential difference causes current to flow, creating a three-dimensional electric field.
-
Page 4: Key Features
This button makes it possible to make a measurement in a dark place and display it after bringing the meter into a lighted area. To extend battery life, the MM8 automatically powers off after two minutes of inactivity. The instrument is powered by a “9V” battery included in the blister pack. -
Page 5: Product Overview
PRODUCT OVERVIEW Fig. 1 shows all of the controls, indicators and physical features of the MM8. Fig. 2 shows all possible display indications. Familiarize yourself with the position and function of all components before moving on to the Setup Instructions. -
Page 6: Setup Instructions
SETUP INSTRUCTIONS INSTALL BATTERY Open the battery compartment at the bottom of the meter (Fig. 1, Callout F) and push the included “9V” battery inside the compartment with the connector facing in and following the polarity as indicated on the compartment. Close the compartment after installing the battery. -
Page 7: Specifications
Although the MM8 auto-calibrates each time it is powered on, the meter can be manually calibrated. Perform a manual calibration whenever the meter cannot produce a reading, or if multiple measurements of the same sample produce very different readings. -
Page 8: Warranty Information
General shall not be liable for loss of use of the product or other incidental or consequential damages, expenses, or economic loss, or for any claim of such damage, expenses, or economic loss.
Need help?
Do you have a question about the MM8 and is the answer not in the manual?
Questions and answers
cannot get battery cover off
To remove the battery cover from a General MM8, turn the meter over and lift the tab at the top of the battery compartment cover. Then, remove the cover and set it aside.
This answer is automatically generated