User's Guide
Slide the envelope into the input slot until it meets resistance.
The envelope shown in the illustration has the opened edge (flap side) facing up, but you can also load envelopes
into the scanner with the opened edge (flap side) facing down.
Important:
c
Do not load envelopes with adhesives on them.
Note:
❏ Envelopes that are not opened by cutting sharply at the flap edge may not be scanned correctly.
❏ Envelopes that have not yet been sealed can be loaded with the flap open and facing up.
Related Information
"Specifications of Originals" on page 13
&
"Basic Scanning" on page 24
&
"Advanced Scanning" on page 29
&
Placing Plastic Cards
Load the plastic card into the left side of the input slot facing up and horizontally.
Specifications of Originals and Placing Originals
20