Uniden AppCam Solo 2 Quick Start Manual page 17

Adjust the Detecting Distance of the PIR Sensor
The default sensitivity of the PIR sensor is at "Mid" and the detecting distance is 6 meters
(20ft). If you want to adjust the sensitivity, please launch your AppCam Solo App, and then
click "Device Settings" -> "PIR Settings" and click the "Save"
Detecting Distance
Sensitivity (For moving and
living things)
Low Up to 4 meters (13ft)
Mid Up to 6 meters (20ft)
High Up to 9 meters (30ft)
Note:
Higher sensitivity offers longer detecting distance, but it
would lead to more false alarms.
You are advised to set up the sensitivity level to "Low" or
"Mid" when you install the camera outdoors.
button to save the settings.
Detecting Distance
(For moving vehicles)
Up to 10 meters (33ft)
Up to 12 meters (40ft)
Up to 15 meters (50ft)
17