Geeetech Prusa I3 pro W Building Instruction page 69

Z axis top mount
M3 x 16mm screw
M3 square nut
Screw locking ring
M3 washer
Step1. Put the locking ring on the two smooth rods separately.
Step2. Add the Z top mount (No.W8) to the top of W1. Slowly rotate the rods into the
holes, or add some lubricants on the rods.
Step3. Screw up the top mount, the main frame and the side panel with M3 x 16mm
screw and M3 Square nut.
Step4. Screw up the locking ring on smooth rods.
Shenzhen GETECH CO.,LTD
No.W8
No.24
No.15
No.18
No. 7
68
2
4
4
2
6
www.geeetech.com