Geeetech Prusa I3 pro W Building Instruction page 25

Shenzhen GETECH CO.,LTD
Step3. Thread the belt though the driven wheel. Lock the wing nut. Do not tighten too
much at this step.
Step4. Taut the belt into the belt bracket, tightly pull and confirm its length, then cut
off the spare part. Insert the end of the belt in the groove bracket
Step 5.Tight the wing nut.
Tips: The pulley, the belt bracket and the driven wheel must be flush to ensure the printing
platform to move smoothly.
24
www.geeetech.com