Storage And Scrapping; Machine Identification Data - Ravaglioli RAVTD1760 WS Instruction Manual

RAVAGLIOLI S.p.A.

14 STORAGE AND SCRAPPING

Storage - If the machine has to be stored for a long period of time, disconnect all supply lines and
protect the display screen, which could be damaged by excessive dust.
Grease any parts liable to be damaged by dryness.
Scrapping - If the machine is to be no longer used, it must be made inoperative:
All those parts that could represent a potential hazard risk must be correctly disposed of. Dispose
of parts according to category.
Scrap as iron scrap through authorised channels.
Parts considered as special waste must be removed and split up according to type and then
disposed of through authorised channels according to applicable regulations.

15 MACHINE IDENTIFICATION DATA

WARNING: It is strictly forbidden to tamper with, notch, somehow alter or even remove
machine identification plate; do not cover it with temporary panels, etc... as it shall always be
clearly visible.
Said plate must always be kept clean.
CAUTION: Should the plate be accidentally damaged (removed from the machine damaged or
even partially illegible) inform immediately the manufacturer.
Page 52/52
RAVTD1760 WS – RAVTD1780 WS
A
B
RAVAGLIOLI S.p.A. - Via I° Maggio, n° 3 (Pontecchio Marconi)
40037 Sasso Marconi (Bologna - Italy)
Tel. 051/ 67.81.511 – Fax 051/ 84.64.67 E-mail: rav@ravaglioli.com
C D
A) Manufacturer
B) Model
C) Machine weight
D) Serial number
E) Year of manufacture
Instruction manual
Code M0197 - rev.1.0
(11/2010)
E