Caution; Preliminary Safety Information - Ravaglioli RAVTD1760 WS Instruction Manual

RAVAGLIOLI S.p.A.
RAVAGLIOLI S.p.A under license.

0 CAUTION

Any damage caused by failure to follow the instructions in this manual or improper
machine use shall relieve RAVAGLIOLI S.p.A. of all liability .

0.1 Preliminary Safety Information

Before starting the machine:
•
Read the instructions and the entire manual before using or working on the wheel aligner.
This manual represents an integral part of the product and is intended to inform the user
on how to use the RAVTD1760WS and RAVTD1780WS wheel aligner. Keep the manual for
the entire life of the machine. Keep it in an easy to access place and refer to it every time
the need arises. All machine operators must be able to read the manual.
•
Make sure the power supply is in conformity with the specifications shown on the plate.
Voltage and frequency data plate is positioned on machine back side. Please, read plate
data. NEVER connect aligner to a voltage or frequency other than the specified ones.
•
Duly arrange wheel aligner power cable. This product features a 3-wire plug with built-in
grounding. It can be plugged into a socket with built-in grounding, only. Should a
grounded socket not be available for machine connection, contact an electrician. Do not
tamper with or misuse plug.
Upon machine switching off:
•
Do not switch off the built-in PC by unplugging it or by turning PC switch to off, but
follow the procedure set forth in par.4.2 on page 13. PC wrong switching off could lead to
HARD-DISK files "corruption".
•
The switching off procedure set forth in par. 4.2 on page 13 does not affect detector
recharge supports, which continue being powered.
In emergency conditions and before performing any maintenance:
•
Insulate the machine against any power source using the special master switch, and
remove plug from power socket.
•
Do not try to service this unit arbitrarily, as the opening or removal of machine doors
could expose user to hazardous voltage. Maintenance operations shall be carried out by
authorised service personnel, only.
Work environment and machine cleaning:
•
The work environment must be kept clean and dry, and must not be exposed to
atmospheric agents. It must also be well lit.
•
Do not clean the machine using jets of water and compressed air.
To clean plastic panels or surfaces use a moist cloth (avoid using liquids containing
solvents).
RAVAGLIOLI S.p.A. shall be entitled to make any changes to the models described in this
manual at any time for reasons of a technical and commercial nature.
RAVTD1760 WS – RAVTD1780 WS
Bluetooth brands are property of their owners, and are used by
RAVAGLIOLI S.p.A. - Via I° Maggio, n° 3 (Pontecchio Marconi)
40037 Sasso Marconi (Bologna - Italy)
Tel. 051/ 67.81.511 – Fax 051/ 84.64.67 E-mail: rav@ravaglioli.com
Instruction manual
Code M0197 - rev.1.0
(11/2010)
Page 3/52